Publications - Systems Engineering
Filter : Year :
Language :
- Hydraulic performance evaluation of a micro-turbine with counter rotating runners by experimental investigation and numerical simulation
Vagnoni E., Andolfatto L., Richard S., Münch-Alligné C., Avellan F.
Renewable Energy, Volume 126, Octobre 2018, pp. 943-953
- An Analysis of Current and Electric Field Pulses Associated with Upward Negative Lightning Flashes Initiated from the Säntis Tower
He L., Azadifar M., Rachidi F., Rubinstein M., Rakov V. A., Cooray V., Pavanello D., Xing H.
Journal of Geophysical Research, Atmospheres, April 9, 2018
- Low-cost seismic network in Nepali schools
Subedi S., Hetényi G.,Sauron A.
Geophysical Research Abstracts, Vol. 20, EGU General Assembly, April 2018
- Pythagorean theorem: a proof without words
Nicollier N., Peperko A., Šter J.
Mathematics Magazine, 2018, to appear
- Experimental Assessment of a New Kinetic Turbine Performance for Artificial Channels
Münch-Alligné C., Schmid J., Richard S., Gaspoz A., Brunner N., Hasmatuchi V.
Water 2018, Volume 10, Issue 3, 311
- How Bürgi computed the sines of all integer angles simultaneously in 1586
Nicollier G.
Mathematische Semesterberichte, Volume 65, Issue 1, March 2018, pp. 15-34
- New Prototype of a Kinetic Turbine of Artificial Channels
Münch-Alligné C., Richard S., Gaspoz A., Hasmatuchi V., Brunner N.
Advances in Hydroinformatics, Springer, Singapore, 2018, pp. 981-996
- U-RANS Simulations and PIV Measurements of a Self-excited Cavitation Vortex Rope in a Francis Turbine
Decaix J., Müller A., Favrel A., Avellan F., Münch C.
Advances in Hydroinformatics, Springer, Singapore, 2018, pp. 1069-1083
- Robustness of Synchrony in Complex Networks and Generalized Kirchhoff Indices
Tyloo M., Coletta T., Jacquod Ph.
Phys. Rev. Lett. 120, 084101, 22 February 2018
- The Optimum Is Not the Goal: Capturing the Decision Space for the Planning of New Neighborhoods
Schüler N., Cajot S., Peter M., Page J., Maréchal F.
Frontiers in Built Environment, Volume 3, Article 76, February 2018
- RANS computations of a confined cavitating tip-leakage vortex
Decaix J., Dreyer M., Balarac G., Farhat M., Münch-Alligné C.
European Journal of Mechanics - B/Fluids, Volume 67, January-February 2018, pp. 198–210
- The optimum is not the goal: Capturing the decision space for the planning of new neighborhoods
Schüler N., Cajot S., Peter M., Page J., Maréchal F.
Frontiers in Built Environment (doi: 10.3389/fbuil.2017.00076)
- Hypoxic, Hypercapnic, and Hyperoxic Responses of the Optic Nerve Head and Subfoveal Choroid Blood Flow in Healthy Humans
Gallice M., Zhou T., Aptel F.,Verges S., Riva Ch., Geiser M., Chiquet Ch.
Investigative Ophthalmology & Visual Science, Vol. 58, No. 12, October 2017, pp. 5460-5467
- The Effects Of Oxygen in The Fatigue Behaviour of MIM Ti-6Al-7Nb Alloy
Amherd Hidalgo A., Ebel T., Limberg M., Frykholm R., Carreño-Morelli E., Pyczak F.
Proc. of European Powder Metallurgy Conference Euro PM2017, Milan, Italy, October 1-5, 2017, pp. 1-6
- Design of a PM-Generator for a Straight Flow Counter-Rotating Micro-Hydro Turbine
Violante D., Farner L., Münch C., Chevailler S.
Proc. of the EPE2017, Warsaw, Poland, September 11-14, 2017
- URANS Models for the Simulation of Full Load Pressure Surge in Francis Turbines Validated by Particle Image Velocimetry
Decaix J., Müller A., Favrel A., Avellan F., Münch C.
Journal of Fluids Engineering, Volume 139, Issue 12, September 2017
- Wide scope categorization of DHC systems for the identification of emerging or disruptive technologies
Girardin L., Marechal F., Wuan D., Page J.
Proc. of the 3rd International Conference on Smart Energy Systems and 4th Generation District Heating, July 2017, Copenhagen, Denmark
- Modular ICT based Energy Management System for a LVDC-Microgrid with Local PV Production and Integrated Electrochemical Storage
Ellert Ch., Horta R., Sterren T., Gabioud D., Roggo D., Moix P.-O.
Proc. of the 2nd IEEE International Conference on DC Microgrids (ICDCM), Nürnberg, Germany, June 27-29, 2017
- Mixed integer programming model for the operation of an experimental low-voltage network
Lilla S., Borghetti A., Napolitano F., Tossani F., Pavanello D., Gabioud D., Maret Y., Nucci C. A.
Proc. of the 12th IEEE PES PowerTech Conference, Manchester, UK, June 18-22, 2017
- A predictive pan-European economic and production dispatch model for the energy transition in the electricity sector
Pagnier L., Jacquod Ph.
Proc. of the 12th IEEE PES PowerTech Conference 2017, Manchester, UK, June 18-22, 2017
- Constraint-Flow Nets: A Model for Building Constraints from Resource Dependencies
Bliudze S., Simalatsar A., Zolotukhina A.
Proc. of the 19th IFIP WG 6.1 International Conference, COORDINATION 2017, Held as Part of the 12th International Federated Conference on Distributed Computing Techniques, DisCoTec 2017, Neuchâtel, Switzerland, June 19-22, 2017, pp. 197-216
- U-RANS simulations and PIV measurements of a self-excited cavitation vortex rope in a Francis turbine
Decaix J., Müller A., Favrel A., Avellan F., Münch C.
Advances in Hydroinformatics, Springer Water - SimHydro 2017 - Choosing The Right Model in Applied Hydraulics, June 14-16, 2017
- New Prototype of an Kinetic Turbine for Rivers and Artificial Channels
Münch C., Gaspoz A., Richard S., Hasmatuchi V., Brunner N.
Advances in Hydroinformatics, Springer Water - SimHydro 2017 - Choosing The Right Model in Applied Hydraulics, June 14-16, 2017
- Electromagnetic interferences in smart grid applications: a case study with PLC smart meters and PV energy generation
Roggo D., Horta R., Capponi L., Eggenschwiler L., Decorvet F., Pellodi C., Buholzer F.
Proc. of CIRED 2017, Paper 1285, Glasgow, Scotland, June 12-15, 2017
- Frequency scans and resonance mode analysis for resonance problems idendification in power networks in presence of harmonic pollution
Eggenschwiler L., Galland O., Chollet D., Decorvet F., Roggo D., Favre-Perrod P.
Proc. of CIRED 2017, Paper 0807, Glasgow, Scotland, June 12-15, 2017
- A Homothetic Property of Orthic Triangles
Nicollier G.
The Mathematical Gazette, Volume 101, Issue 551, Note 101.21, July 2017, pp. 303-306
- The Size of the Sync Basin Revisited
Delabays R., Tyloo M., Jacquod Ph.
Chaos: An Interdisciplinary Journal of Nonlinear Science, Volume 27, Issue 10 (10.1063/1.4986156), June 2017
- Analysis of lightning-ionosphere interaction using simultaneous records of source current and 380 km distant electric field
Azadifar M., Li D., Rachidi F., Rubinstein M., Diendorfer G., Schulz W., Pichler H., Rakov V. A., Paolone M., Pavanello D.
Journal of Atmospheric and Solar-Terrestrial Physics, Volume 159, May 2017, pp. 48-56
- Finite-size scaling in the Kuramoto model
Coletta T., Delabays R., Jacquod Ph.
Physical Review E 95, 042207, 13 April 2017
- RANS computations for identification of 1-D cavitation model parameters: application to full load cavitation vortex rope
Alligné S., Decaix J., Müller A., Nicolet C., Avellan F., Münch C.
Journal of Physics: Conference Series, 813, 12032
- Multistability of phase-locking in equal-frequency Kuramoto models on planar graphs
Coletta T., Delabays R., Jacquod Ph.
Journal of Mathematical Physics, Volume 58, Issue 3 (10.1063/1.4978697)
- MIM of nickel-free nitrogen strengthened austenitic stainless steel from biopolymer based feedstock
Carreño-Morelli E., Zinn M., Rodriguez-Arbaizar M., Bassas M., Girard H., Chappuis T., Richard J.
Powder Injection Moulding International, 2017, Vol. 11, No. 4, 2017, pp. 91-95
- Sintering optimisation of Fe–Si soft magnetic materials processed by metal injection moulding
Páez-Pavón, A., Jiménez-Morales, A., Rodriguez-Arbaizar, M., Carreño-Morelli, E., Torralba, J.M.
Powder Metallurgy, Vol. 60, No. 2, 2017, pp. 112-119
- Two Six-Circle Theorems for Cyclic Pentagons
Nicollier G.
Forum Geomectricorum, volume 16 (2016), pp. 347-354
- Minimal Proof of Generalized Droz-Farny Theorem
Nicollier G.
Forum Geometricorum, volume 16 (2016), pp. 397-398
- Nickel-free P558 stainless steel processed from metal powder – PHA biopolymer feedstocks
Carreño-Morelli E., Zinn M., Rodriguez-Arbaizar M., Bassas M.
European Cells and Materials 2016, Volume 31, Supplement. 2, 2016, p. 32
- Topologically protected loop flows in hight voltage AC power grids
Coletta T., Delabays R., Adagideli I., Jacquod Ph.
New Journal of Physics 18, 103042, October 2016
- Powder Injection Moulding Of Low Modulus Ti-13Nb-13Zr For Implant Application
Bidaux J.-E., Comby F., Rodriguez-Arbaizar M., Carreño-Morelli E.
Proc. of World PM2016 Congress, Hamburg, October 9-13, 2016, pp. 1-6
- Performance Measurements on the DuoTurbo Microturbine for Drinking Water Systems
Hasmatuchi V., Biner D., Münch-Alligné C.
Proc. of the HYDRO 2016 conference, Montreux, Switzerland, October 10-12, 2016
- Local algorithm for the open loop control of thermostatically controlled loads
Gabioud D., Roduit P., Maître G.
Maître G.
- Large Electric Load Fluctuations in Energy-Ecient Buildings and how to Suppress them with Demand Side Management
Coletta T., Delabays R., Pagnier L., Jacquod Ph.
Proc. of IEEE PES Innovative Smart Grid Technologies conference, Ljubljana, Slovenia, October 9-12, 2016
- Additive Manufacturing By Solvent Jetting On Granule Beds
Carreño-Morelli E., Rodriguez-Arbaizar M., Flückiger G., Cachelin C., Bircher F., Renner J., Richard J.
Proc. of Powder Metallurgy World Congress WorldPM2016, Hamburg, Germany, October 9-13, 2016, pp. 1-6
- Processing Of Titanium Parts With Optimal Tensile Properties By Press And Sintering Of Low Cost Titanium Hydride
Carreño-Morelli E., Rodriguez-Arbaizar M., Corthay S., Girard H., Amherd Hidalgo A., Bidaux J.-E.
Proc. of Powder Metallurgy World Congress WorldPM2016, Hamburg, Germany, October 9-13, 2016, pp. 1-6
- MIM of Nitrogen-strengthened Austenitic Stainless Steel Using Biopolymer-based Binder
Carreño-Morelli E., Zinn M., Rodriguez-Arbaizar M., Bassas M., Girard H., Chappuis T., Richard J.
Proc. of Powder Metallurgy World Congress WorldPM2016, Hamburg, Germany, October 9-13, 2016, pp. 1-6
- Fundamental Understanding Of The Influence Of Oxygen On The Fatigue Behaviour Of Ti-6Al-7Nb Alloys
Amherd Hidalgo A., Ebel T., Pyczak F., Limberg W., Frykholm R., Carreño-Morelli E., Brash B.
Proc. of Powder Metallurgy World Congress WorldPM2016, Hamburg, Germany, October 9-13, 2016, pp. 1-6
- Engineering multi-agent systems using feedback loops and holarchies
Basso G., Cossentino M., Hilaire V., Lauri F., Rodriguez S., Seidita V.
Engineering Applications of Artificial Intelligence, Volume 55, October 2016, pp.14-25
- Proof Whitout Words: Viviani for Congruent Cevians
Nicollier G.
Mathematics Magazine, Volume 89, October 2016, pp. 216-217
- Elastic Behavior: Superelasticity
Bidaux J.-E., Gotthardt R.
Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier, October 2016, pp. 1-3
- The unexpected power of the connected quartz watch
Rieder M.
Proc. of the 16e Congrès International de Chronométrie 2016 (CIC2016), Montreux, Suisse, September 28-29, 2016, pp. 17-23
- Numerical study of 3D turbulent cavitating flows
Goncalves E., Decaix J., Charrière B.
6th Symposium on Hybrid RANS-LES Methods (HRLM 2016), Strasbourg, France, September 26-28, 2016
- A method for taking into account seasonal storage in a district energy system optimisation problem
Robineau J.-L. S., Page J., Maréchal F.
Proc. of the 15th International Symposium on District Heating and Cooling, Seoul, Republic of Korea (South Korea), September 4-7, 2016
- A district energy system optimisation method including a combined daily and seasonal storage
Robineau J.-L., Page J., Maréchal F.
Proc. of the 15th International Symposium on District Heating and Cooling (DHC 2016), Seoul, Republic of Korea (South Korea), September 4-7, 2016
- Metal injection moulding of superelastic TiNi parts
Bidaux J.-E., Amherd Hidalgo A., Girard H., Rodriguez-Arbaizar M., Reynard L., Chevallier J., Aeby F., Giachetto J.-C., Carreño-Morelli E.
Key Engineering Materials, 2016, vol. 704, pp. 173-182
- Bipolar Lightning Flashes Observed at the Säntis Tower
Azadifar M., Rachidi F., Rubinstein M., Rakov V.A., Pavanello D., Paolone M.
International Conference on Lightning Protection (ICLP), Estoril, Portugal, September 2016
- Experimental characterization of a five blade tubular propeller turbine for pipe inline installation
Samora I., Hasmatuchi V., Münch-Alligné C., Franca M. J., Schleiss A. J., Ramos H. M.
Renewable Energy, Volume 95, September 2016, pp. 356-366
- Dynamic efficiency measurements on hydraulic turbomachinery model testing : examples of implementation and validation
Hasmatuchi V., Bosioc A., Luisier S., Münch-Alligné C.
11th International conference on hydraulic efficiency measurement (IGHEM 2016), Linz, Austria, August 24-26, 2016
- Using reasoned imagination to learn about cascading hazards: a pilot study
Mignan A., Scolobig A., Sauron A.
Disaster Prevention and Management, June 2016, Vol. 25, Issue 3, pp. 329-344
- Engineering & Performance of DuoTurbo: Microturbine with Counter-Rotating Runners
Biner D., Hasmatuchi V., Violante D., Richard S., Chevailler S., Andolfatto L., Avellan F., Münch C.
Proc. of the 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 04-08, 2016
- Simulation of energy recovery on water utility networks by a micro-turbine with counter-rotating runners
Andolfatto L., Vagnoni E., Hasmatuchi V., Münch-Alligné C., Avellan F.
28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 04-08, 2016
- Energy production with a tubular propeller turbine
Samora I., Hasmatuchi V., Münch-Alligné C., Franca M. J., Schleiss A. J., Ramos H. M.
Proc. of the 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 4-8, 2016
- RANS computations for identification of 1-D cavitation model parameters: application to full load cavitation vortex rope
Alligné S., Decaix J., Müller A., Nicolet C., Avellan F., Münch C.
Proc. of the 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 04-08, 2016
- Head loss coefficient through sharp-edged orifices
Adam N.J., De Cesare G., Schleiss A.J., Richard S., Münch-Alligné C.
Proc. of the 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 04-08, 2016
- On the Dynamic Measurements of Hydraulic Characteristics
Hasmatuchi V., Bosioc A., Münch-Alligné C.
Proc. of the 28th IAHR symposium on Hydraulic Machinery and Systems, Grenoble, France, July 04-08, 2016
- EMC Studies on Grid Integration of Distributed Energy Resources
Wasterlain S., Parisod H., Roggo D., Carpita M.
Proc. of the 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2016), Capri, Italia, June 22-24, 2016
- DC Bus based microgrid for buildings applications
Horta R., Roggo D., Ellert Ch.
Proc. of the CIRED Workshop 2016, Paper 0466, Helsinki, Finland, June 14-15, 2016
- Establishing links for the planning of sustainable districts
Cajot S., Schuler N., Peter M., Page J., Koch A., Maréchal F.
Proc. of the Sustainable Built Environment (SBE) Conference, June 13-17 2016, Zürich, Switzerland
- Multi-modal Controller for Image Manipulation in the Operating Room
Sierro A., Mudry P.-A.
Posters proceedings of the 24th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision 2016 (WSCG 2016), May 30 - June 3, 2016, Plzeň, Czech Republic, pp. 9-12
- An Update on the Measurements of Lightning Currents and Electromagnetic Fields Associated with Flashes to the Säntis Tower in Switzerland
Azadifar M., Li D., Paolone M., Pavanello D., Rachidi F., Rubinstein M.
International Colloquium on Lightning and Power Systems, Bologna, Italy, June 2016
- Area of the Orthic Quadrilaterals of a Convex Cyclic Orthodiagonal Quadrilateral
Nicollier G.
Forum Geometricorum, Volume 16 (2016), pp. 233-239
- Development and testing of a Bi-stable Actuator based on a High Transition Temperatures Shape Memory Alloy
Paciotti G., Bidaux J.-E., Girard H., Rottmeier F., Blecha L.
Proc. of the 43rd Aerospace Mechanisms Symposium, NASA Ames Research Center, Santa Clara, CA, May 4-6, 2016, pp. 453-464
- Simultaneous Current and Distant Electric Field Waveforms from Upward Lightning: Effect of Ionospheric Reflection
Azadifar M., Li D., Rachidi F., Rubinstein M., Diendorfer G., Pichler H., Paolone M., Pavanello D.
International Lightning Detection Conference, San Diego, USA, April 2016
- Linear Stability and the Braess Paradox in Coupled Oscillators Networks and Electric Power Grids
Coletta T., Jacquod Ph.
Physical Review E 93, 032222
- Multistability of Phase-Locking and Topological Winding Numbers in Locally Coupled Kuramoto Models on Single-Loop Networks
Delabays R., Coletta T., Jacquod Ph.
Journal of Mathematical Physics 57, 032701 (2016)
- An automated microreactor for semi-continuous biosensor measurements
Buffi N., Beggah S., Truffer F., Geiser M., van Lintel H., Renaud Ph., van der Meer J. R.
Lab on a Chip - The Royal Society of Chemistry, March 7, 2016
- Extremal Distance Ratios
Nicollier G.
The Mathematical Gazette, Volume 100, Issue 547, Note 100.09, March 14, 2016, pp. 129-130
- On Lightning Electromagnetic Field Propagation along an Irregular Terrain
Li D., Azadifar M., Rachidi F., Rubinstein M., Paolone M., Pavanello D., Metz S., Zhang Q., Wang Z.
IEEE Transactions on Electromagnetic Compatibility, Volume 58, No 1, February 2016, pp. 161-171
- Evaluation of the Performance Characteristics of the European Lightning Detection Network EUCLID in the Alps Region for Upward Negative Flashes Using Direct Measurements at the Instrumented Säntis Tower
Azadifar M., Rachidi F., Rubinstein M., Paolone M., Diendorfer G., Pichler H., Schulz W., Pavanello D., Romero C.
Journal of Geophysical Research: Atmospheres, January 19, 2016, pp. 595-606
- Scale-up of phosphate remobilization from sewage sludge in a microbial fuel cell
Happe M., Sugnaux M., Cachelin C.P., Stauffer M., Zufferey G., Kahoun T., Salamin P.A., Egli T., Comninellis C., Grogg A.F., Fischer F.
Bioresource Technology, Volume 200, January 2016, pp. 435-443
- RANS Computations of a Cavitating Tip Vortex
Decaix J., Balarac G., Münch C.
Advances in Hydroinformatics - SimHydro 2014, Springer Water, 2016
- RANS Computations of tip Vortex Cavitation
Decaix J., Balarac G., Dreyer M., Farhat M., Münch C.
Proc. of 9th International Symposium on Cavitation, Lausanne, Switzerland, December 6-10, 2015
- Identification of the wave speed and the second eddy viscosity of cavitation flows with 2D RANS computations - Part I
Decaix J., Alligné S., Nicolet C., Avellan F., Münch C.
Proc. of 9th International Symposium on Cavitation, Lausanne, Switzerland, December 6-10, 2015
- Identification of the wave speed and the second eddy viscosity of cavitation flows with 2D RANS computations - Part II
Decaix J., Alligné S., Nicolet C., Avellan F., Münch C.
Proc. of 9th International Symposium on Cavitation, Lausanne, Switzerland, December 6-10, 2015
- Proof Without Words: Half Issues in the Equilateral Triangles and Fair Pizza Sharing
Nicollier G.
Mathematics Magazine, Volume 88, Number 5, December 2015, pp. 337
- A Characterization of Affinely Regular Polygons
Nicollier G.
Beiträge zur Algebra und Geometrie, Volume 57, Issue 2, pp. 453-458
- A Generalisation of Proizvolov's Identity
Nicollier G.
The Mathematical Gazette, volume 99, issue 546, pp. 525-256
- Nickel-free P558 austenitic steel parts processed from metal powder – PHA biopolymer feedstocks
Carreño-Morelli E., Zinn M., Rodriguez-Arbaizar M., Bassas M.
Proc. of European Powder Metallurgy Conference Euro PM2015, Reims, France, October 4-7, 2015, pp. 1-6
- Characteristics of electric fields of upward negative stepped leaders
Azadifar M., Rachidi F., Rubinstein M., Paolone M., Rakov V.A., Pavanello D., Metz S., Romero C.
Proc. of 13th SIPDA International Symposium on Lightning Protection, Balneário Camboriú, Brazil, pp. 32-36
- Contact-less Palm/Finger Vein Biometrics
Sierro A., Ferrez P., Roduit P.
Proc. of 14th International Conference of the Biomectrics Special Interest Groupe (BIOSIG)
- An extensible simulator for dynamic control of residential area: Case study on heating control
Basso G., Ferrez P., Gabioud D., Roduit P.
Proc. of 18th Euromicro Conference on Digital Systems Design (DSD 2015), Funchal, Madeira, Portugal, August 26-28, 2015, pp. 486-493
- Distributed grid storage by ordinary house heating variations: a Swiss case study
Maître G., Basso G., Steiner C., Gabioud D., Roduit P.
Proc. of 18th Euromicro Conference on Digital Systems Design (DSD 2015), Funchal, Madeira, Portugal, August 26-28, 2015, pp. 241-249
- Design and control of a new hydraulic test rig for small hydro turbines
Hasmatuchi V., Botero F., Gabathuler S., Münch C.
The International Journal on Hydropower & Dams, Volume 22, Issue 4, 2015, pp. 51-60
- Guidelines on Statistical Business Registers
United Nations Economic Commission for Europe - Paul-André Salamin, contributing author
United Nations Economic Commission for Europe, August 2015
- Compact Laser Doppler Flowmeter (LDF) Fundus Camera for the Assessment of Retinal Blood Perfusion in Small Animals
Mentek M., Truffer F., Chiquet Ch., Godin-Ribuot D., Amoos S., Loeuillet C., Bernabei M., Geiser M.
PLOS ONE, 10(7), July 30, 2015
- Hydraulic performance of a new isokinetic turbine for rivers and artificial channels
Hasmatuchi V., Alligné S., Kueny J.-L., Münch C.
E-proc. of the 36th IAHR World Congress, The Hague, The Netherlands
- New hydraulic test rig for small power turbomachines
Hasmatuchi V., Botero F., Gabathuler S., Münch C.
E-proc. of the 36th IAHR World Congress, The Hague, The Netherlands
- Protection and automation test bench associated to a reduced-scale model of a power system for teaching purposes
Ritler T., Pavanello D., Gabioud D.
PAC WORLD, Glasgow, Scotland, June 29 - July 2, 2015
- Inverter to Grid: Voltage control strategies for the grid
Roggo D., Moix P.-O., Gabioud D.
Proc. of CIRED 2015, Lyon, France, June 15-18, 2015
- ESPeciaL: An Embedded Systems Programming Language
Métrailler Ch., Mudry P.-A.
6th ACM SIGPLAN Scala Symposium (SCALA 2015), Portland, USA, June 13, 2015, pp. 51-55
- Contribution to the Knowledge Development for Smart Cities
Jakutyte-Walangitang D., Page J., Pol O., Schmidt R.-R., Mollay U.
Sustainable Development, Knowledge Society and Smart Future Manufacturing Technologies by Walter Leal Filho, Arnolds Ubelis, Dina Berzina (Editors), Springer Verlag, 2015, pp. 149-161
- Spectral Grid Impedance and Electromagnetic Interferences in the 2 to 150KHZ Frequency Range
Roggo D.
International Journal of Distributed Energy Resources and Smart Grids, Volume 11, Number 2, pp. 143-151
- Design & performance of a hydraulic micro-turbine with counter-rotating runners
Biner D., Hasmatuchi V., F. Avellan, Münch-Alligné C.
Proc. of the 5th International Youth Conference on Energy 2015, Pisa, Italia
- Generation and Detection of Spin Currents in Semiconductor Nanostructures with Strong Spin-Orbit Interaction
Nichele F., Hennel S., Pietsch P., Gerl C., Wegscheider W., Stano P., Jacquod Ph., Ihn T., Ensslin K.
Physical Review Letters, Volume 114, Issue 20, 206601
- A Simple Dynamic Localization of the Gravitational Center of a Triangle
Nicollier G.
Forum Geometricorum, volume 15, pp. 263-265
- Some Theorems on Polygons With One-line Spectral Proofs
Nicollier G.
Forum Geometricorum, volume 15, pp. 267-273
- RANS and LES simulations of the tip leakage vortex for different gap widths
Decaix J., Balarac G., Dreyer M., Farhat M., Münch C.
Journal of Turbulence, Volume 16, Issue 4, pp. 309-341
- Aggregating building energy demand simulation to support urban energy design
Jessen P., Dervey S., Morand G.
Proc. of PLEA2014, Ahmedabad, India, December 16-18, 2014
- A comparative study of cavitation models in a Venturi flow
Charrière B., Decaix J., Goncalvès E.
European Journal of Mechanics - B/Fluids, vol. 49, 12/2014, pp. 287-297
- Low elastic modulus Ti–17Nb processed by powder injection moulding and post-sintering heat treatments
Bidaux J.-E., Pasquier R., Rodriguez-Arbaizar M., Girard H., E. Carreño-Morelli E.
Powder Metallurgy 2014, volume 57, No 5, pp. 320-323
- Investment casting of nozzle guide vanes from nickel-based superalloys: part I – thermal calibration and porosity prediction
Torroba A. J., Koeser O., Calba L., Maestro L., Carreño-Morelli E., Rahimian M., Milenkovic S., Sabirov I., Llorca J.
Integrating Materials and Manufacturing Innovation 2014, 3:25, pp. 1-25
- Investment casting of nozzle guide vanes from nickel-based superalloys: part II - grain structure prediction
Torroba A. J., Koeser O., Calba L., Maestro L., Carreño-Morelli E., Rahimian M., Milenkovic S., Sabirov I., Llorca J.
Integrating Materials and Manufacturing Innovation 2014, 3:26, pp. 1-16
- Mind the gap: a new insight into the tip leakage vortex using stereo-PIV
Dreyer M., Decaix J., Münch-Alligné C., Farhat M.
Experiments in Fluids, Volume 55, Issue 11, November 2014
- An Update on the Charaterictics of Positive Flashes Recorded on the Säntis Tower
Azadifar M., Paolone M., Pavanello D., Rachidi F., Rakov V.A., Romero C., Rubinstein M.
32nd International Conference on Lightning Protection (ICLP), Shanghai, China, October 13-17, 2014.
- Low elastic modulus Ti-17Nb processed by powder Injection moulding and post-sintering Heat Treatments
Bidaux J.-E., Pasquier R., Rodriguez-Arbaizar M., Girard H., E. Carreño-Morelli E.
Proc. of European Powder Metallurgy Congress Euro PM2014, Salzburg, Austria, September 21-24, 2014, pp. 1-6
- Development of a PM-Generator for a Counter-Rotating Micro-Hydro Turbine
Melly D., Horta R., Münch C., Biner H.-P., Chevailler S.
Proc. of XXI International Conference on Electrical Machines, Berlin, Germany, September 2-5, 2014, pp. 124-129
- Choroidal blood flow and choroidal thickness
Pournaras C., Donati G., Frountzou E., Geiser M., Riva C. E.
Acta Ophthalmologica, Volume 92, September 2014
- Effect of acute hypoxia or hyperoxia on the optic nerve head and choroidal blood flow in healthy humans
Chiquet C., Zhou T., Gallice M., Aptel F., Truffer F., Geiser M.
Acta Ophthalmologica, Volume 92, September 2014
- Laser Doppler flowmetrie on small animal
Geiser M., Truffer F., Mentek M., Bernabei M., Aptel F., Chiquet C.
Acta Ophthalmologica, Volume 92, September 2014
- RANS Computations of a Cavitating Tip Vortex
Decaix, J., Balarac, G., Münch, C.
Proc. of SimHydro 2014, 11-13 June 2014, Sophia Antipolis, France
- Non-Intrusive Appliance Load Curve Monitoring for Service Development
Ferrez P., Roduit P.
Proc. of IEEE EnergyCon 2014, Dubrovnik, Croatia, May 13-16, 2014, pp. 813-820
- Production of titanium grade 4 components by powder injection moulding of titanium hydride
Carreño-Morelli E., Bidaux J.-E., Rodriguez-Arbaizar M., Girard H., Hamdan H.
Powder Metallurgy 2014, Volume 57, No 2, pp. 89-92
- Porous titanium processed by powder injection moulding of titanium hydride and space holders
Carreño-Morelli E., Rodriguez-Arbaizar M., Amherd A., Bidaux J.-E.
Powder Metallurgy 2014, Volume 57, No 2, pp. 93-96
- Forward osmosis in a portable device for automatic osmolality adjustment of environmental water samples evaluated by cell-based biosensors
Talaei S., Fujii Y., Truffer F., van der Wal P. D., de Rooij N. F.
Journal of Membrane Science, Volume 454, March 2014, pp. 470–477
- Dynamics of the Nested Triangles Formed by the Tops of the Perpendicular Bisectors
Nicollier G.
Forum Geometricorum, volume 14, 2014, pp. 31-41
- Compact portable biosensor for arsenic detection in aqueous samples with Escherichia coli bioreporter cells
Truffer F., Buffi N., Merulla D., Beggah S., Lintel H., Renaud P., Roelof Meer J., Geiser M.
Review of Scientific Instruments 85, 015120, January 2014
- Relative size of the squares inscribed in a triangle
Nicollier G.
The Mathematical Gazette, volume 98(1), 2014, pp.117-119
- Limit shape of iterated Kiepert triangles
Nicollier G., Stadler A.
Elem. Math. 69, 2014, pp. 61-64
- Numerical simulations of a counter rotating micro turbine
Müch-Alligné C., Richard S., Meier B., Hasmatuchi V., Avellan F.
Advances in Hydroinformatics, P. Gourbesville et al. (eds.), Springer Hydrogeology, 2014, pp. 363-373
- Signatures of Majorana fermions in hybrid normal-superconducting rings
Jacquod P., Büttiker M.
Physical Review B 88, 241409 (R), December 2013
- Positive lightning flashes recorded on the Säntis tower from May 2010 to January 2012
Romero C., Rachidi F., Rubinstein M., Paolone M., Rakov V. A., Pavanello D.
Journal of Geophysical Research, Atmospheres, December 2013
- Schlieren laser Doppler flowmeter for the human optical nerve head with the flicker stimuli
Geiser M., Truffer F., Evéquoz H., Khayi H., Mottet B., Chiquet C.
Journal of Biomedical Optics, Volume 18, Issue 12, December 2013, 127001-127001
- Solution to Problem 210
Nicollier G.
Crux Math. 38, 2012, pp. 338-341 (solution published in October 2013)
- A modular methodology for the development of urban energy planning support software
Ouhajjou N., Palensky P., Stifter M., Page J., Fenz S., Tjoa A. M.
Proc. of the IECON 2013, 39th annual conference of the IEEE Industrial Electronics Society, Vienna, Austria, November 10-13, 2013
- Porous titanium processed by powder injection moulding of titanium hydride and space holders
Carreño-Morelli E., Rodriguez-Arbaizar M., Amherd A., Bidaux J.-E.
Proc. of European Powder Metallurgy Conference Euro PM2013, Gothenburg, Sweden, 2013, Vol 3 , pp. 283-288
- Metal injection moulding of low modulus Ti-Nb alloys for biomedical applications
Bidaux J.-E., Closuit C., Rodriguez-Arbaizar M., Zufferey D., Carreño-Morelli E.
Powder Metallurgy, 56, 4, 2013, pp. 263-266
- Development of Sensor Assay Microbe Systems (SAMS)
Geiser M.
International Innovation, 2013
- Domestic Electricity Consumption Data for Research and Service Development
Ferrez P., Renevey P., Hutter A., Roduit P.
Proc. of CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013, pp. 1127-1132
- Design optimization of a 2D blade by means of milling tool path
Vessaz C. Tournier C., Münch C., Avellan F.
CIRP Journal of Manufacturing Science and Technology 6, 2013, pp. 157-166
- Porous titanium by powder injection moulding of titanium hydride and PMMA space holders
Carreño-Morelli E., Amherd A., Rodriguez-Arbaizar M., Zufferey D., Várez A., Bidaux, J.-E.
European Cells and Materials, 2013, Vol. 26. Suppl. 4, pp. 16
- Opportunities and limits of in vitro cytotoxicity test methods exemplified by powder metallurgy titanium alloys
Pusnik M., Bruinink A., Rodriguez-Arbaizar M., Carreño-Morelli E., Zinn M.
European Cells and Materials, 2013, Vol. 26. Suppl. 4, pp. 44
- On-line 2 to 150 kHz grid impedance meter
Roggo D., Merendaz L., Furrer D.
CIRED, 22nd International Conference on Electricity Distribution, Stockholm, Sweden, June 10-13, 2013
- Convolution Filters for Triangles
Nicollier G.
Forum Geometricorum, volume 13, 2013, pp. 61-85
- Development of interferometer for refractive index measurement of aqueous solution in a microfluidic chip
Chen M. H., Geiser M., Truffer F., Song C. L.
Laser Physics Letters 10, Issue 4, April 2013, 45701-45701
- Convolution Filters for Polygons and the Petr-Douglas-Neumann Theorem
Nicollier G.
Contributions to Algebra and Geometry, ISSN 0138-4821, Journal n° 13366, 2013, pp. 701-708
- Processing of a low modulus Ti-Nb biomaterial by Metal Injection Moulding (MIM)
Bidaux J.-E. , Closuit C., Rodriguez-Arbaizar M., Zufferey D., Carreño-Morelli E.
Powder Injection Moulding International, 2012, vol 6, N° 4, pp. 72-75
- Fe2.7Si, Fe50Ni and Fe50Co soft ferromagnetic materials by powder injection moulding
Carreño-Morelli E., Rodriguez-Arbaizar M., Girard H., Hussein H., Herzog R.
Proc. of PM2012 Powder Metallurgy World Congress, Yokohama, Japan, October 14-18, 2012, pp. 1-5
- Metal injection moulding of low modulus Ti-Nb for biomedical applications
Bidaux J.-E., Closuit C., Rodriguez-Arbaizar M., Zufferey D., Carreño-Morelli E.
Proc. of European Powder Metallurgy Conference Euro PM2012, Basel, Switzerland, vol. 1, pp. 199-204
- A Universal Platform for Green RFID Applications Development
Kanan R., Petrovic D.
Proc. of 20th IEEE International Conference on Software, Telecommunications and Computer Networks, SoftCOM 2012, Split, Croatia, September 2012
- Reflection Triangles and their Iterates
Nicollier G.
Forum Geometricorum, volume 12, 2012, pp. 83-128
- Some Characteristics of Positive and Bipolar Lightning Flashes Recorded on the Säntis Tower in 2010 and 2011
Romero C., Rubinstein M., Rachidi F., Paolone M., Rakov V. A., Pavanello D.
Proc. of 31st International Conference on Lightning Protection, Vienna, Austria, September 2-7, 2012
- Analysis of Lightning Detection Network Data for Selected Areas in Canada
Shostak V., Bormotov O., Pavanello D., Janischewskyj W., Rachidi F.
Proc. of 31st International Conference on Lightning Protection, Vienna, Austria, September 2-7, 2012
- A statistical analysis on the risetime of lightning current pulses in negative upward flashes measured at Säntis tower
Romero C., Paolone M., Rachidi F., Rubinstein M., Pavanello D., Giri D. V.
Proc. of 31st International Conference on Lightning Protection, Vienna, Austria, September 2-7, 2012
- A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode
Faes A., Hessler-Wyser A., Zryd A., Van Herle J.
Membranes 2012, 2, pp. 585-664
- ActorDroid - A distributed computing framework for mobile devices based on Scala actors
Mudry P.-A., Cherix R.
Scala Days 2012, London, UK, April 17-18, 2012
- Lightning Return Strokes to Tall Towers: Ability of Engineering and Electromagnetic Models to Reproduce Nearby Electromagnetic Fields
Mosaddeghi A., Shoory A., Rachidi F., Rubinstein M., Diendorfer G., Pichler H., Pavanello D.
IEEE Transactions on Electromagnetic Compatibility, Volume 54 , Issue 4, August 2012 , pp. 889-897
- A SMART RFID Transponder
Kanan R., Petrovic D.
International Conference on Wireless and Mobile Communications, ICWMC 2012, Venice, Italy, June 2012
- Novel Low Harmonic Three-Phase 12-pulse Inverter
Pietkiewicz A., Biner H.-P.
Proc. of International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Sorrento, Italy, June 20-22, 2012, pp. 837-842
- Rapid Prototyping System for RFID Sensing Applications
Kanan R., Petrovic D.
Proc. of European Conference on Smart Objects, Systems and Technologies, Smart SysTech 2012, Munich, Germany, June 2012
- Microwave barrel reactor use in trimethylolpropane oleate synthesis by Candida antarctica lipase in a biphasic non-solvent process
Happe M., Grand P., Farquet S., Aeby S., Héritier J. C., Corthay F., Mabillard E., Marti R., Vanoli E., Grogg A. F., Nussbaum S., Roduit A., Tièche F., Salem S., Constantin C., Schmitt E., Zahno S., Ellert C., Habib A., Wyss J., Fischer F.
Green Chemistry, Issue 8, 2012, pp. 2337-2345
- Optimization of strength of SOFC anode supports
Frandsen H. L., Ramos T., Faes A., Pihlatie M., Brodersen K.
Journal of the European Ceramic Society, Volume 32, Issue 5, May 2012, pp. 1041–1052
- Three-dimensional microstructural changes in the Ni-YSZ solid oxide fuel cell anode during operation
Nelson G.J., Grew K.N., Izzo J.R. Jr., Lombardo J.J., Harris W.M., Faes A., Hessler-Wyser A., Van herle J., Wang S., Chu Y.S., Virkar A.V., Chiu W.K.S.
Acta Materialia, Volume 60, Issue 8, May 2012, pp. 3491-3500
- Numerical Simulation of a new sand trap flushing system
Daneshvari M., Münch-Alligné C., De Cesare G.
Proc. of 4th IAHR International Symposium on Hydraulic Structures, Porto, Portugal, February 9-11, 2012, pp. 1-8
- Measurement of Lightning Currents Using a Combination of Rogowski Coils and B-Dot Sensors
Romero C., Mediano A., Rubinstein A., Rachidi F., Rubinstein M., Paolone M., Zweiacker P., Mora N., Pavanello D., Daout B.
Journal of Lightning Research, 2012, 4, pp. 71-77
- Influence of Raman crystallinity on the performance of micromorph thin film silicon solar cells
Ellert Ch., Wachtendorf C., Hedler A., Klindworth M., Martinek M.
Solar Energy Materials & Solar Cells, Volume 96, 2012, pp. 71-76
- Blood flow measurements within optic nerve head during on-pump cardiovascular operations. A window to the brain?
Nenekidis I., Geiser M., Riva C., Pournaras C., Tsironi E., Vretzakis G., Mitilis V., Tsilimingas N.
Interactive CardioVascular and Thoracic Surgery, 12, 2011, pp. 718-723
- Titanium Grade 4 by powder injection moulding of titanium hydride
Carreño Morelli E., Bidaux J.-E., Rodríguez-Arbaizar M., Girard H., Hamdan H.
Proc. of European Powder Metallurgy Conference Euro PM2011, Barcelona, Spain, October 9-12, 2011, vol.2, pp.105-110
- Tape casting of porous titanium thin sheets from titanium hydride
Bidaux J.-E., García-Gómez J., Hamdan H., Zufferey D., Rodriguez-Arbaizar M., Girard H., Carreño-Morelli E.
Proc. of European Powder Metallurgy Conference Euro PM2011, Barcelona, Spain, October 9-12, 2011, vol.2, pp.351-355
- Powder Injection Moulding of Functional Ceramic Components for Solid Oxide Fuel Cells
Zryd A., Girard H., Faes A., Carreño-Morelli E.
Proc. of European Powder Metallurgy Conference Euro PM2011, Barcelona, Spain, October 9-12, 2011, vol.3, pp.401-405
- Mechanical and microstructural integrity of nickel–titanium and stainless steel laser joined wires
Vannod J., Bornert M., Bidaux J.-E., Bataillard L., Karimi A., Drezet J.-M., Rappaz M., Hessler-Wyser A.
Acta Materialia, Volume 59, Issue 17, October 2011, pp. 6538-6546
- Extremely Low-Power Indoor Localization System
Kanan R., Petrovic D.
Proc. of IEEE International Conference On Mobile Ad-Hoc and Sensor Systems, Valencia, Spain, October, 2011
- Smart Electric Blinds
Bützberger F., Truffer C.
CISBAT, EPFL, Lausanne, September 15, 2011
- Strength of Anode-Supported Solid Oxide Fuel Cells
Faes A., Frandsen H. L., Kaiser A., Pihlatie M.
Fuel Cells, 2011, vol. 11(5), pp. 682-689
- Solid Oxide Fuel Cell Degradation Studied by Electron Microscopy
Hessler-Wyser A., Schuler J. A., Wuillemin Z., Jeangros Q., Faes A., Wagner J. B., Hansen T. W., Dunin-Borkowski R., Van herle J.
Proc. of Microscopy Conference MC 2011, Kiel, Deutschland, August 28 - September 2, 2011
- Development of a Tidal Current Turbine
Münch C., Vonlanthen M., Gomes J., Guinard P., Avellan F.
SHF Conference on Cavitation & Hydraulic Machines, EPFL, Lausanne, May 27, 2011
- Processing of titanium-based materials from low cost titanium hydride powders: PIM and tape casting
Carreño-Morelli, E., Bidaux, J.-E.
Proc. of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011, San Francisco, USA, May 18-21, 2011, pp. 465-476
- Nano-silicon carbide reinforced aluminium composites prepared by high-energy milling and hot consolidation
Kollo L., Bradbury C.R., Veinthal R., Jaeggi C., Carreño-Morelli E., Leparoux M.
Materials Science and Engineering A528, 2011, pp. 6606-6615
- Metal injection moulding of Ti-Nb alloys for implant application
Bidaux J.-E., Closuit C., Rodriguez-Arbaizar M., Carreño-Morelli E.
European Cells and Materials Vol. 22. Suppl. 4, 2011, p. 32
- Net-shape titanium grade 4 parts processed from titanium hydride powders
Carreño-Morelli E., Rodriguez-Arbaizar M., Girard H., Hamdan H., Bidaux J.-E.
European Cells and Materials Vol. 22. Suppl. 4, 2011, p. 33
- Choroidal laser Doppler flowmeter with enhanced sensitivity based on a scattering plate
Wang C., Ding Z., Wu T., Chen M., Geiser M.
SPIE, Journal of Biomedical Optics, vol. 16, 2011
- Research on Fast Measurement of Green Tea Polyphenols Content Based on the Electrochemistry Method
Zhu D., Xu H.R., Geiser M., Bernabei M., Andlauer W.
Journal of Tea Science, vol. 31, no. 3, 2011, pp. 179-186
- Net-shape Al6061/SiC nanocomposites by powder injection moulding
Rodríguez-Arbaizar M., Hamdan H., Leparoux M., Kollo L., Kwon H., Carreño Morelli E.
Proc. of PM2010 Powder Metallurgy World Congress PM2010, Florence, Italy, October 10-14, 2010, vol.4, pp.429-434
- Tape casting of bronze-graphite sheets for tribological applications
Bidaux J.-E., Sonney V., Hamdan H., Carreño-Morelli E., Bonjour C., Bosc P.
Proc. of PM2010 Powder Metallurgy World Congress PM2010, Florence, Italy, October 10-14, 2010, vol.2, pp.709-714
- Hardness of hot consolidated Al–SiC nanocomposites from planetary milled powders
Kollo L., Leparoux M., Bradbury C. R., Kommel L., Carreño-Morelli E., Rodríguez-Arbaizar M.,
Proc. of PM2010 Powder Metallurgy World Congress PM2010, Florence, Italy, October 10-14, 2010, vol.1, pp.341-346
- Powder injection moulding of titanium from TiH2 powders
Carreño-Morelli E., Krstev W., Romeira B., Rodríguez-Arbaizar M., Bidaux J.-E., Zachmann S.
Metal Russia, August-September 2010, pp. 20-22
- Experiences with the design of small hydraulic power plants
Dubas M.
International Congress on Small Hydropower Hidroenergia 2010, Lausanne, June 16-19, 2010
- Titanium parts by powder injection moulding of TiH2-based feedstocks
Carreño-Morelli E., Krstev W., Romeira B., Rodriguez-Arbaizar M., Girard H., Bidaux J. E., Zachmann S.
Powder Injection Moulding International, 2010, vol 4, N° 3, pp.60-63
- Hydrogen storage properties of as-synthesized and severely deformed Magnesium - Multiwall carbon nanotubes composite
Skripnyuk, V.M., Rabkin, E., Bendersky, L.A., Magrez, A., Carreño-Morelli, E., Estrin, Y.
International Journal of Hydrogen Energy, Volume 35, Issue 11, June 2010, pp. 5471-5478
- A shape-memory alloy actuated valve for space propulsion systems
Bidaux J.-E., Paciotti G., Hunter C.
International Conference on Shape-Memory and Superelastic Technologies, SMST-2010, Extended abstracts, Pacific Grove, CA USA, May 16-20, 2010, pp.74-75
- Close-Range Electric Fields Associated with Lightning Strikes to the Austrian Gaisberg Tower
Mosaddeghi A., Shoory A., Rachidi F., Rubinstein M., Diendorfer G., Pichler H., Pavanello D., Nyffeler M.
International Journal of Plasma Environmental Science & Technology, Vol. 4, March 2010
- Investigation of planetary milling for nano-silicon carbide reinforced aluminium metal matrix composites
Kollo L., Leparoux M., Bradbury C., Jäggi C., Carreño-Morelli E., Rodriguez-Arbaizar M.
Journal of Alloys and Compounds 489, 2010, pp.394-400
- Break the mould
Carreño-Morelli E.
Medical Device Developments, 2009, vol.2, pp. 57-59
- Carbon nanotube - metal matrix composites
Carreño-Morelli E.
Dekker Encyclopedia of Nanoscience and Nanotechnology, Second Edition - Six Volume Set, CRC Press, 2009, pp.611-619
- Ocular blood flow assessment using continuous laser Doppler flowmetry
Riva Ch. E., Geiser M., Petrig B. L.
Acta Ophthalmologica, Volume 87, Issue 7, October 23, 2009
- Tape casting of copper based shape-memory alloys
Bidaux J.-E., Girard H., Sonney V., Hamdan H., Rey-Mermet S., Carreño-Morelli E.
Proc. of European Powder Metallurgy Conference Euro PM2009, Copenhagen, Denmark, October 12-14, 2009, Vol.1, pp. 371-376.
- Effect of particle agglomeration on rheology of alumina feedstocks for powder injection moulding
Arias-Serrano B., Thomas-Vielma P., Várez A., Levenfeld B., Martinerie S., Carreño-Morelli E.
Proc. of European Powder Metallurgy Conference Euro PM2009, Copenhagen, Denmark, October 12-14, 2009, Vol.2, pp. 41-46
- Powder injection moulding of titanium from TiH2 powders
Carreño-Morelli E., Krstev W., Romeira B., Rodríguez-Arbaizar M., Bidaux J.-E., Zachmann S.
Proc. of European Powder Metallurgy Conference Euro PM2009, Copenhagen, Denmark, October 12-14, 2009, Vol.2, pp. 9-14
- Spray drying technique as a method for improving rheology of alumina feedstocks for powder injection moulding
Arias-Serrano B., Thomas-Vielma P., Várez A., Levenfeld B., Martinerie S., Carreño-Morelli E.
Proc. of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2009
- Titanium and Ti6Al4V parts processed by metal injection moulding
Carreño-Morelli E., Kstrev W., Bidaux J.-E.
Proc. of ESB2009, 22nd European Conference on Biomaterials, September 7-11, 2009, Lausanne, Switzerland, A-No 0833
- UHF RFID Transponders Antenna Design for Metal and Wood Surfaces
Kanan R., Azzizi A.
IEEE International Conference On RFID, Orlando, FL, USA, April, 2009.
- Net-shape manufacturing of shape-memory parts
Carreño-Morelli E., Bidaux J.-E.
Advances in Powder Metallurgy & Particulate Materials - 2008, Metal Powder Industries Federation, 2008, pp. 4.191-4.199
- The new confocal device combined with monitoring of the entrance site of the laser beam at the pupil provides laser Doppler blood fl ow data at the ONH that show a variability that makes the device potentially useful for physiological and clinical investigations."
European Association for Vision and Eye Research EVER 2008, Abstracts, October 1-4, 2008
- Tape casting of copper alloys for tribological applications
Cans M., Hamdan H., Öner Y., Bidaux J.-E., Carreño-Morelli E.
Proc. of Euro PM2008 , European Powder Metallurgy Conference, Mannheim, Germany, September 29 - October 1, 2008, Vol.1, pp. 27-32
- Elastic Behavior: Superelasticity
Bidaux J.-E., Gotthardt R.
Encyclopedia of Materials Science and Technology, 2008, pp. 2423-2425
- Three-dimensional printing of stainless steel parts (2008)
Carreño-Morelli E., Martinerie S., Mucks L., Cardis B.
Materials Science Forum 591-593, 2008, pp.374-380
- Powder injection moulding of NiTi shape memory materials
Bidaux J.-E., Jochem A., Carreño-Morelli E.
Powder Injection Moulding International, 2008, vol 2, N° 1, pp. 59-62
- Three-dimensional printing of stainless steel parts (2007)
Carreño-Morelli E., Martinerie S., Mucks L., Cardis B.
Proc. of PTECH2007, Sixth International Latin-American Conference on Powder Technology, Búzios, Brazil, November 07-10, 2007, pp. 665-670
- Metal injection moulding of NiTi shape memory alloys
Bidaux J.-E., Jochem A., Zufferey D., Carreño Morelli E.
Proc. of Euro PM2007, European Powder Metallurgy Conference, Toulouse, France, October 15-17, 2007, Vol. 2, pp. 223-228
- Development of pressure sensors by powder technology
Carreño-Morelli E., Martinerie S., Jacq C., Maeder T., Vionnet-Menot S., Ryser P.
Proc. of Euro PM2007, European Powder Metallurgy Conference, Toulouse, France, October 15-17, Vol.1, pp. 393-398, 2007
- Multiple step transformation in NiTi alloy
Bataillard L., Bidaux J.-E.
Proc. of the Materials and Processes for Medical Devices Conference, Medical Devices Materials IV, sept 23-25, 2007, Palm Desert, California, USA, pp. 3-8
- bSol : A straightforward approach to optimize building comfort and energy consumption in early design process.
Bonvin M., Morand G., Seppey P.-A.
Proc. of IBPSA 2007, 10th International Building Performance Simulation Association 2007, Beijing, China, September 3-6 ,2007
- Three-dimensional printing of shape memory alloys
Carreño-Morelli E., Martinerie S., Bidaux J.-E.
Materials Science Forum 534-536, 2007, pp. 477- 480
- Field Programmable Gate Arrays (FPGA) versus Digital Signal Processors (DSP)
Johnsen O., Crausaz P., Magliocco C., Prêtre D., Corthay F., Maître G., Kocher M.
Bulletin SEV/VSE, 3/2007, pp.23-26
- Three-dimensional printing of shape memory alloys (2006)
Carreño-Morelli E., Martinerie S., Bidaux J.-E.
Extended Abstracts of PM2006 Powder Metallurgy World Congress, Busan, Korea, September 24-28. 2006, Eds. K. Y. Eun and Y.-S. Kim, pp. 256-257
- Compiled and Synthesized UML
Berthouzoz C., Corthay F., Rieder M., Steiner R., Sterren T.
Vachoux, A. Applications of Specification and Design Languages for SoCs, Netherlands: Springer, 2006, 231-246
- Synthesized UML, a Practical Approach to Map UML to VHDL
Rieder M., Steiner R., Berthouzoz C., Corthay F., Sterren T.
Lecture Notes in Computer Science, Volume 3943, Heidelberg: Springer Berlin, 2006, 203-217
- High performance thick-film pressure sensors on steel
Jacq C., Maeder T., Martinerie S., Corradini G., Carreño-Morelli E., Ryser P.
Proc. of 4th European Microelectronics and Packaging Symposium, Terme Catez, Slovenia, May 21-24, 2006, pp. 105-109
- Biochemical process optimization with closed-loop identification approach and adaptative controller
Moghaddam Bützberger F., Dessimoz F., Vaccari A.
Proc. of 13th IFAC Workshop on Control Applications of Optimisation, April 2006
- Porous single-phase NiTi processed under Ca reducing vapor for use as a bone graft substitute
Bertheville B.
Biomaterials, 27, 2006, pp 1246-1250
- Carbon nanotube - metal matrix composites
Carreño-Morelli E.
Dekker Encyclopedia of Nanoscience and Nanotechnology, Taylor & Francis, 2006, pp.1-9
- Solid free-form fabrication of dense metallic parts
Carreño-Morelli E., Martinerie S.
Euro PM 2005: Powder Metallurgy Congress and Exhibition 3, pp. 61-65
- Development of low-temperature thick-film materials for piezoresistive sensors
Jacq C., Maeder T., Vionnet-Menot S., Grimaldi C., Saglini I., Ryser P., Carreño-Morelli E.
Proceedings of Sintering 2005, Grenoble, France, August 29 - September 1, 2005, pp. 200-203
- Enhanced solid-state sintering of porous Ti-based alloys using vapor phase metallothermic reduction processes
Bertheville B., Bobet J.-L., Bidaux J.-E., Zufferey D.
Proc. of Sintering'05, Grenoble, France, August 29 - September 1, 2005, pp. 319-322
- Alternative powder metallurgical processing of Ti-rich NiTi shape-memory alloys
Bertheville B., Bidaux J.-E.
Scripta Materialia, Vol. 52, 2005, pp. 507-512
- Enhanced powder sintering of near-equiatomic NiTi shape-memory alloys using Ca reductant vapor
Bertheville B., Bidaux J.-E.
Journal of Alloys and Compounds, Vol. 387, 2005, pp. 211-216
- XMI2CODE
Clerc D.
N° NEBIS: 005163065, 2005
- Design for a New High Frequency Inverter-Charger, Controlled by a Fixed Point DSP
Germanier A., Biner H.-P., Blatter D.
Proc. of European Conference on Power Electronics, Intelligent Motion and Power Quality PCIM 2005, Nüremberg, Germany, June 7 -9, 2005, pp. 766-771
- Small variable speed power plant on a drinking water network
Biner H.-P., Dubas M., Germanier A.
Proc. of European Conference on Power Electronics, Intelligent Motion and Power Quality PCIM 2005, Nüremberg, Germany, June 7 -9, 2005, pp. 420-424
- Design and efficiency of overshot water-wheels
Dubas M.
Int. Journal on Hydropower and Dams, vol. 12, N° 3, 2005, pp.74-78
- Carbon nanotube / light-metal composites
Carreño-Morelli E., Schmidt N., Schaller R., Forró L.
TMS Letters, 2, 2005, pp. 119-120
- Fabrication process and shape memory effect of NiTi alloys synthesized from Ni/TiH2 powder mixture
Bertheville B., Bidaux J.-E.
Proc. of PM2004 Powder Metallurgy World Congress, Vienna, Austria, October 17-21, 2004, vol.2, pp.197-202
- Warm compaction and high-temperature sintering of NiTi
Bertheville B., Bidaux J. -E., Leclerc B., Bonjour C.
Proc. of SMST-2004 Int. Conf. on Shape Memory and Superelastic Technologies, October 3-7, 2004, Ed. M. Mertmann, pp. 469-474
- Miniature Valve Controller
Torrent S., Ramambason O., Moerschell J.
Proc. of the IPLnet Workshop, Murten, September 2004
- Improving Automated Manufacturing using Robots; A Proposed Methodology
Trad A., Gauthey P.-F., Loersch M., Dessimoz J.-D., Riedi M., Marcuard J.-D.
IPLnet Workshop, Murten, September 2004
- Commande sensorless de moteurs brushless
Bochud M., Bützberger F., Rotzetta A., Torrent S.
Proc. of IPLnet Workshop, Morat, September 2004
- Surface Inspection System for Industrial Applications
Balemi S., Moerschell J., Bregue J.-M.
IEEE Mechatronics & Robotics, Aachen, 2004
- Corneal and Retinal Temperatures under Various Ambient Temperatures: a Model and Experimental Approach
Geiser M., Bonvin M., Quibel O.
Klin Monatsbl Augenheilkd, 2004, 211: 311-314
- Powder sintering and shape-memory behaviour of NiTi compacts synthesized from Ni and TiH2
Bertheville B., Neudenberger M., Bidaux J. -E.
Materials Science and Engineering A 384, 2004, pp.143-150
- High performance very low frequency forced pendulum
Gutiérrez-Urrutia I., Nó M. L., Carreño-Morelli E., Guisolan B., Schaller R., San Juan J.
Materials Science and Engineering A 370, 2004, pp.435-439
- Tiny tubes boost for metal matrix composites
Carreño-Morelli E, Yang J., Couteau E, Hernadi K., Seo J. W., Bonjour C., Forró L., Schaller R.
Metal Powder Report 59, July 2004, pp.40-43, reprinted from Proc. of EURO PM2003
- Carbon nanotube / magnesium composites
Carreño-Morelli E., Yang J., Couteau E., Hernadi K., Seo J. W., Bonjour C., Forró L., Schaller R.
Physica Status Solidi (a), Volume 201, Issue 8, June 2004, pp. R53-R55
- Web Services und OPC auf Embedded Systems
Gabioud D.
Aktuelle Technik 1/2004, p. 28-30
- Quantifying thermo-mechanical fatigue of light-metal matrix composites by mechanical spectroscopy
Carreño-Morelli E.
Metallurgical and Materials Transactions A 35, January 2004, pp.25-36
- Carbon nanotube reinforced metal matrix composites
Carreño-Morelli E., Yang J., Schaller R., Bonjour C.
Proc. of EURO PM2003, European Conference on Powder Metallurgy, Valencia, Spain, October 20-22, 2003
- Processing and characterization of shape memory alloys from NiTi pre-alloyed powders
Bertheville B., Martinerie S., Bidaux J.-E.
Proc. of EURO PM2003, European Conference on Powder Metallurgy , Valencia, Spain, October 20-22, 2003, pp.411-416
- Dual-axis Single-mirror Mechanism for Beam Steering and Stabilisation in Optical Intersatellite Links
Coppoolse W., Kreienbühl M., Moerschell J., Dommann A.
European Space Materials and Mechanisms Symposium, September 2003, San Sebastian
- Carbon nanotube composites
Schaller R., Forro L., Bonjour C., Carreño-Morelli E.
Proc. of International Nano Conference 2003 and Top Nano 21 Annual Meeting, St. Gallen, Switzerland, September 9-11, 2003, pp. 256-257
- Selective laser sintering of aluminium- and titanium-based composites: processing and characterization
Vaucher S., Carreño-Morelli E., André C., Beffort O.
Physica Status Solidi (a), 199, September 2003, pp. R11-R13
- Development and test of a fine pointing assembly for optical intersatellite link communications (Conference Proceedings Paper)
Adolph P., Coppoolse W., Moerschell J.
SPIE Optomechatronic Systems Conf., Stuttgart, Germany, October 18, 2002
- Mechanical loss and dimensional stability during thermal cycling of SiC particle reinforced aluminium alloys
Carreño-Morelli E., Schaller R.
Physica Status Solidi (a), 194, 2002, pp. R1-R3
- FPGA Integration of Fast Motion Control Algorithms
Moerschell J., Deladoey L., Praplan C.
Microswiss TLD 2002, Lucerne, Switzerland, 2002
- Shape memory alloy wires turn composites into smart structures: II. Manufacturing and properties
Michaud V., Schrooten J., Parlinska M., Gotthardt R., Bidaux J.-E.
Proc. of SPIE, 9th international symposium on smart structures and materials, San Diego, CA, vol. 4698, July 9, 2002, pp. 406-415
- Opto-electronic method permitting the experimental determination of KID from a resilience test
Cans M., Schmidt N.
Proc. of the International Workshop on Video-Controlled Materials Testing- Nancy, 1999, 56-59
- Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
Carreño-Morelli E. , Cutard T., Schaller R., Bonjour C.
Materials Science and Engineering A251, 1998, pp. 48-57